Introduction: The Radio Remote Control

Picture of The Radio Remote Control

The aim is to invert the controls on the remote control

Step 1: Initially the 4 Grapevines Unscrew Him That Unite the Superior Part With the Inferior Part, So Opening the Remote Control

Picture of  Initially the 4 Grapevines Unscrew Him That Unite the Superior Part With the Inferior Part, So Opening the Remote Control

Step 2: You Disconected the Cables Connected to the Batteries and the Card of the Spar

Picture of  You Disconected the Cables Connected to the Batteries and the Card of the Spar

Step 3: They Are Detached Two Levers of Control Disconnecting the Cables That Are Connected to the Principal Card, the Levers They Are Reversed Connecting the Cables Previously Disconnected

Picture of They Are Detached Two Levers of Control Disconnecting the Cables That Are Connected to the Principal Card, the Levers They Are Reversed Connecting the Cables Previously Disconnected

Step 4: Here Is the Image With the Inverted Levers

Picture of Here Is the Image With the Inverted Levers

Step 5: The Pilots Have Finally Effected a Flight of Test With the Remote Control With the Inverted Levers

Picture of The Pilots Have Finally Effected a Flight of Test With the Remote Control With the Inverted Levers

Comments

Swansong (author)2017-02-13

Thanks for sharing :)

About This Instructable

138views

1favorite

More by simone12345:The radio remote control
Add instructable to: