Introduction: The Raptor a Knex War Pistol + INSTRUCTIONS !!!!

Picture of The Raptor a Knex War Pistol + INSTRUCTIONS !!!!

I was working on a pistol one day when it hit me no one has made a good indoor war pistol

An indoor war pistol must:
Shoot around 30-40 ft
Shoot blue or yellow ammo
Good mag size
Big, comfortable, and sturdy
Durable accurate flip up sights
Good looks and be a good sidearm

So I made just that the raptor is seven layers thick boasting a good pun pull, a ten round blue rod mag, good sights, and sturdy design and trigger

Some stats about the raptor
Range 30-35 ft (with blue rods)
Accurate to about 40 ft (shots taken from hilltop)
Flip up sights
Ten round blue rod mag
Red book of westmarch trigger

PLEASE TELL ME IF INSTRUCTIONS ARE EASY OR ASK ME IF YOU DIDNT UNDERSTAND A PART I WILL HELP CLARIFY

VIDEO LINK http://youtu.be/WpFho0Ag68s

Step 1: INSTRUCTIONS (yey)

I am going to give instructions for the raptor please build and tell me how it performs for you

Step 2: OUTER PANNELS

Picture of OUTER PANNELS

The outer panels
Just build them it's self explanatory

Step 3: SIGHTS AND TRIGGER GUARD

Picture of SIGHTS AND TRIGGER GUARD

Note spacers aren't needed just helpful

Keep these around until the end of the project

Step 4: INNER FRAME

Picture of INNER FRAME

Just keep building I will show u how to put them together when we get to it

Step 5: INNER-INNER FRAME

Picture of INNER-INNER FRAME

This keeps the mech together

Build two of these

Step 6: THE MECH

Picture of THE MECH

Note must have both inner-inner frames built just mount the mech as shown

Step 7: HANDLE

Picture of HANDLE

Build each peice and then I will show how to make the handle

A rubber band is added to hold everything on

Step 8: ASSembly

Picture of ASSembly

Have the parts in front of you and just follow along

Add other side of mech holder to mech holder and mech

Hard isn't it....

Step 9: ASSembly Part 2

Picture of ASSembly Part 2

Add handle

Step 10: ASSembly Part 3

Picture of ASSembly Part 3

Outer inner frame and sights

Step 11: ASSembly Part 4

Picture of ASSembly Part 4

Outer frame

Step 12: BANDING! FINALLY

Picture of BANDING! FINALLY

Note make your own mag pusher

Step 13: CONGRATULATIONS

You are done good for you now shoot it and see for yourself why this is an amazing indoor war sidearm

Comments

Knextremely stupid (author)2015-06-20

It would shoot yellow rods but I just don't have enough parts

Lucas The Boss (author)2015-06-20

Nice, it looks really good with 7 layers. It's not really a war gun since the range isn't great and it shoots blue rods.

sandroknexmaster (author)2015-06-19

Nice!

sonic broom (author)2015-06-18

Cool!

Knextremely stupid (author)2015-06-17

Thx

CorgiCritter (author)2015-06-17

That's very nice. Good job.

About This Instructable

322views

5favorites

License:

Bio: Retired from instructables now. I am going over to YouTube so check me out at "knextreme productions"!
More by Knextremely stupid:The Saber Mk 2.0The Wolverine a K'nex Assault Rifle + VideoK'nex Competitor 5 Review
Add instructable to: