Print PDF
Favorite
Email
Step 2Putting power on the device
Next step was to put power on the device. I took a standard usb cable and cut it apart.
The red and the black cable are the ones that gat the power. The usb port is capable of giving you 5V on 1/2 amperes. This is enough for the phone to operate. Feed the cable through the hole in the plastic cover and solder it to the old battery contacts.
The red and the black cable are the ones that gat the power. The usb port is capable of giving you 5V on 1/2 amperes. This is enough for the phone to operate. Feed the cable through the hole in the plastic cover and solder it to the old battery contacts.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Sep 19, 2008. 6:20 PMLurch
says:
I'd insulate the green and white wires to prevent inadvertently shorting out the USB data line. Other than that, the rest of the guide would make it better!
Reply
 |
Add Comment
|
