Print PDF
Favorite
Email
Step 23The sockets
The figure shows two views of a turned pin integrated circuit socket. It is made of pins, machined from bar stock, molded into plastic.
We need to liberate the pins from the plastic. Heat the pin carefully until the plastic softens (but does not melt) and pull the pin free. We need seven of those pins.
We need to liberate the pins from the plastic. Heat the pin carefully until the plastic softens (but does not melt) and pull the pin free. We need seven of those pins.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
