Print PDF
Favorite
Email
Step 2Cutting and creating cord holes
Take your bottle and cut the base off. Make the cut about 1 inch above the bottom.
Now squash the bottle flat.
Mark three points for cord mounting. Position holes as pictured.
Cut small holes to feed the cord through. At the neck you will need two small holes to feed the cord through.
Now squash the bottle flat.
Mark three points for cord mounting. Position holes as pictured.
Cut small holes to feed the cord through. At the neck you will need two small holes to feed the cord through.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
