The Sipriani Rifle V 2.0 (Revised)





Introduction: The Sipriani Rifle V 2.0 (Revised)

Check my Sukito TS-1120 Dune Buggy too!

For "Mods" by Knexmaster7000, go to this link.

Here it is!
The Revised Sipriani Rifle!

I decided to remake this gun because some people had problems with the flimsy barrel (it broke in two with too many rubberbands)
Well, this is the best version yet!
It has a pretty awesome range, sturdy barrel, and a cool ass stock!
Nothing to say anymore, so i'm just gonna say some pros and no's:

-130 ft range
-Cool and comfy stock
-Sturdy barrel
-Better trigger!
-Can pierce a box from 5 metres distance
-Uses 2 64# rubberbands

-High part use

You likey?
Let's get too building then, shall we?

Step 1: Piece List:

Of course, a gun requires parts.
and this is the list for those specific parts.

1 grey rod (ammo)
2 yellow bendy rods
2 orange bendy rods
35 blue rods
105 white rods
109 green rods

12 reds + 1 red (ammo)
5 light greys
2 greys
20 oranges
11 whites
9 greens
95 yellows

??? chain links (as many as you want)
2 blue clips
2 y-shapes
2 blue spacers
18 grey spacers

2 #64 rubberbands
1 small rubberband

Got the pieces?
Let's move on then!

Step 2: Chain

It is not required but, it just makes it looks sweet!

Step 3: Trigger Part #1 and Part #2

This is the new trigger.
(made by kookoo for knex in the instructable: Viccie.B1993's Sipriani Rifle Add-ons)

Step 4: Bottom Barrel

For upgrading the strength of the barrel.

Step 5: Upper Stock

This part is to hold the stock in place.

Step 6: Middle Stock

This part is to give the stock a nice touch and, for added strength.

Step 7: Trigger Thingy

don't know what to call it but it is required for stre

Step 8: Handle

For added grip and therefore, added accuracy

Step 9: Rubberband Holders

These parts are the holders for the rubberbands because without them, the rubberbands would fly together with the bullet.

(#64 rubberbands are recommended, i only had these at the time)

Step 10: Side 1

This is one of the sides for added strength.

Step 11: Side 2

This is one of the sides for added strength.

Step 12: Barrel

This part is to hold the bullet in place.

Step 13: Bottom Stock

This part is for a stronger stock and nicer looks.

Step 14: Bullet

Same ol' bullet from the original Sipriani.
no upgrades were needed for the bullet.

Step 15: Assembly + Rubberband Emplacement

Not clear enough?
Post a comment with your problem at the specific step.

Step 16: You're Done!!!

Well you've built yourself the Sipriani Rifle V 2.0 (Revised).

Have freaking much fun!!!!



    • Trash to Treasure

      Trash to Treasure
    • Pocket-Sized Contest

      Pocket-Sized Contest
    • Pro Tips Challenge

      Pro Tips Challenge

    We have a be nice policy.
    Please be positive and constructive.




    Step 3 REALLY needs more pics. I can't see what's inside that casing

    Is the part list accurate?

    It looks like it to me but i'd like to know for sure. I'm pretty sure Skreetsha was accurate because I did a rough equation and it seemed to check out.

    oops did i say 1,000,000,000
    i meant 100,000,000,000,000

    a google 100,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000.