Print PDF
Favorite
Email
Step 4Test the Wiring, Add Griptape
Once it was restrung and tuned up, I plugged it in and jammed on it for a while.
It sounded pretty good for a Chinese Squire.
It didn't occur to me until then that it needed some griptape.
So I took it back apart, removed everything from the pickguard (should have done this at the beginning), traced the pickguard onto the grip tape, traced a coffee can onto the grip tape (to cover the ugly rout in the body), and cut them out with a box cutter.
And then...
It sounded pretty good for a Chinese Squire.
It didn't occur to me until then that it needed some griptape.
So I took it back apart, removed everything from the pickguard (should have done this at the beginning), traced the pickguard onto the grip tape, traced a coffee can onto the grip tape (to cover the ugly rout in the body), and cut them out with a box cutter.
And then...
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jun 21, 2009. 6:13 PMsysse
says:
Ingenious!
Reply
 |
Add Comment
|
