The SkyWalker TallBike Project

Step 9 Photo 10 - Stairway to the sky

Since the idea behind SkyWalker is to be able to climb while moving, a ladder of some sort will be needed. Using a few lengths of 3/4 electrical conduit, a crude ladder (Photo 10) is made. This ladder will be welded to the rear frame tube so that the pilot can get from the ground to the seat in approximately 10 steps. This ladder system worked out very well, and it was possible to get from the seat to the ground in under 5 seconds. On a conventional "pole hugger" tallbike, your only option is to find another pole for landing or face the consequences of gravity. For this reason, conventional tallbikes are usually made with seat heights of no more than 8 feet.