Instructables

The Swingset Pull-up Bar!

Featured

Step 6: Preparation for the Bar

Picture of Preparation for the Bar
On the swingset, drill a hole on the beam parallel to the 4x4 using the drill and drill bit.  Make sure the hole in the 4x4 is the same height up as the hole in the swingset so the pull-up bar will be level.  Use a level to double check that the bar will be perfectly horizontal.  You don't want to be sliding onto one side of the bar!
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!