Introduction: The Third Hand Stand

Picture of The Third Hand Stand

The "Third Hand Stand" is a soldering Iron stand with two additional slots for working positions.

Step 1: Soldering to a Circuit Board

Picture of Soldering to a Circuit Board

The stand is useful when applying solder to a circuit board allowing you to use your hands to hold the solder and or any other item needed to work.

Step 2: The Horizontal Position

Picture of The Horizontal Position

This position is useful when soldering two wires together.


redlizard5 (author)2011-08-09

did you just drill a hole for the pipe or did u glue it somehow also

Kaiven (author)2008-11-12

Ideas are attacking me! help!!

GorillazMiko (author)2007-11-29

cool! i would do this, but i have a cordless soldering iron. just about one week, now the button is some how messed up, and it has to be pushed hard :-(

clothbot (author)GorillazMiko2007-11-30

That actually sounds like an ideal situation. Replace the messed-up button with a 1/4" or 1/8" socket so you can plug in a foot switch.

About This Instructable



More by robagire:The Third Hand Stand
Add instructable to: