Introduction: The Top 11 CMD Commands You Would Not Find Anywhere

If you need the top commands to get the info you need as a seasoned Tech Engineer then these 11 would help you.

Step 1: Check Battery Time in CMD

C:\>wmic path win32_battery get estimatedchargeremaining

Step 2: Check System Installation Date in CMD

C:\>systeminfo | find "Original"

Step 3: Check Number of NICs in Computer by CMD

C:\>systeminfo | find "Network"

Step 4: Check System Boot Time in CMD

C:\>systeminfo | find "System Boot Time"

Step 5: Show Available Drives on Computer in CMD

C:\>fsutil fsinfo drives

Step 6: See Users, Domain and SID in CMD

C:\>wmic useraccount list brief

Step 7: Show Process List Every 1 Second

wmic process list brief /every:1

Step 8: Show HotFixes in CMD

wmic qfe

Step 9: See Programs Running on Startup in CMD

wmic startup list full

Step 10: Show Connected Network Interfaces on IPV4

netsh interface ipv4 show interfaces