Instructables
Picture of The UFO Coffee Table!!
Picture 001.jpg
Picture 002.jpg
Picture 003.jpg
This is something I did from only $ 10 worth of materials, for a contest. The main part is the test tube holder.
blueangelcat4 months ago
Link no longer exists as it was now up for sale,if you could repost it on here then it will be there forever! For all to see your brilliance!
Namt2 years ago
Awesome idea
tinker2343 years ago
wow
acidbass3 years ago
awesome
Number095 years ago
I'm sure if you were REALLY determined you could make something similar with: - Two round sheets of metal (top and bottom) - A long sheet of metal (side) - Some hardware to put it together - A good drill bit or two (to make the circles) - Some coloured gels or candy wrappers (to fill the circles) - An old lamp-thing or light fixture - Something that spins like a lazy susan or something This was just 2 minutes of quick thinking, but if you really thought about it I'm sure you could make it work...
Transquesta6 years ago
I clicked, I saw, I clicked again. . .and I was WHOLLY unimpressed--not by the project; that was killer--but by the complete LACK of information on how to replicate same. Pardon my confusion, but isn't this a DIY/how-to site? I've been ROBBED! And it's a real beotch getting robbed when you didn't pay anything to get in. :-) Where's the BEEF?! How'd you make it, where'd you get the parts, etc.? These are the kind of tidbits, you know, which would make this an actual IN-STRUCT-IBLE.
aceofspeeds (author)  Transquesta6 years ago
that's why I posted it in slideshow, not in "instructable" section....
exactly correct usage of "slideshow", BTW...
While it's a neat project, I suspect the uniqueness of the raw materials would make a full instuctable not that much more useful.
aceofspeeds (author)  westfw6 years ago
Exactly my point! Unless you work in a university or a commercial lab and have access to lab junk, you'll probably not be able to find any suitable materials for this one...
I meet the requirements to have the materials for this, now please, post a brief description of the materials and parts. THX :-)
moonkittie6 years ago
seriously, it's awesome! but how do you do it?
instructables is bout posting instructions...great idea but no instruction*tears
foobear6 years ago
More info please.
That is SO AWESOME! I would love to see this as an Instructable.
Kiteman6 years ago
As others have said, this would make a great 'ible.

Are the parts all "junk"? Where did you find that humongous test-tube rack?
aceofspeeds (author)  Kiteman6 years ago
I only bought the dividers and the halogen lamp. The test-tube rack and other stuff were "JUNK" and donated by the SWAP shop as the part of the competition; I think all of these are some type of university refuse. For more information about the contest and SWAP visit http://www.wiscontrepreneurship.org/challenge/
That's an excellent idea - good luck (I've looked at your link, so you've got my click in the peoples' vote).
Brennn106 years ago
You should make a full instructable for this project! This is a really cool project!
aceofspeeds (author) 6 years ago
actually, the "junk components" (and even me constructing!) can be seen if you click on the link ;)
I know - where do you think I found them? ;-). But I think you would get a better reception if you posted them here as well.
Patrik6 years ago
Very nice indeed! May I recommend that you also include the two other pictures of the "junk" components, and the table under construction? I'm sure you're going to get lots of questions on how you made this, plus the picture with you + the table nicely shows the scale.
westfw6 years ago
Very nice!