loading

Step 1: Finding Your 'Prints'

Before we can start 'crafting' our miniature blocks and mobs, we need to find a template for what we want to build, to help you out, i've compiled a multitude of templates, ready to print, for you to use. Just pick what you want to create from down below, and save it. When your set, check out step two. Oh, and in the parenthesis is the difficulty of the craft, for the most part these are easy, but some can be a bit more challenging!


Day Mobs

NOTE: If you are getting 403 errors try going here!

Your Skin! (Medium) [Just upload your skin's file, and print away!) *Link submitted by lilliu97*

Steve (Medium)

Steve's arm Holding a Pickaxe (Hard)

PIg (Medium)

Cow (Medium)

MooShrom (Medium)

Chicken (Hard)

Sheep (Easy-ish) 

Sheep (Part 2)

Squid (Easy-ish)

Wolf (Medium)
 
Villager (Medium) *Link submitted by Aikidoboy*

Pigman (Easy) *Asked for by wooohhhoooo9*

Night/ Neither/ Ender Mobs

NOTE: If you are getting 403 errors try going here!

Creeper (Easy-ish)

Silverfish (Medium)

Skeleton (Extreme!)

Spider (Medium)

Slime (Easy)

Zombie (Medium)

Zombie-Pigman (Medium)

Enderman (Medium)

Blaze (Medium)

Ghast (Hard-ish)

Magma Cube (Easy)

Ender Dragon (Not for the Faint of Heart) *link submitted by tbh-1138*


Blocks (there's A LOT of blocks, so i won't post them all, but here are the most popular,)

NOTE: If you are getting 403 errors try going here!

Bedrock (Easy)

Block Breaking Overlay (Easy)

Brick (Easy)

Breaking Brick (Easy)

Brick With Torches (Easy)

Brick with Ladder (Easy)

Grass (Easy)

Grass with Minecart Track-Strait (Easy)

Grass with Minecart Track-Turn (Easy)

Snow Covered Grass (Easy)

Chest (Medium)

Coal Ore (Easy)

Iron Ore (Easy)

Lapis Lazuli Ore (Easy)

RedStone Ore (Easy)

Gold Ore (Easy)

Diamond Ore (Easy)

Lapis Lazuli Block (Easy)

Gold Block (Easy)

Diamond Block (Easy)

Clay (Easy)

Cobblestone (Easy)

Cobblestone with Minecart Track (Easy)

Cobblestone with Ladder (Easy)

Crafting Table (Easy)

Dirt (Easy)

Dirt with Minecart Tracks (Easy)

Farmland Dry (Easy)

Farmland Wet (Easy)

Furnace (Easy)

Log/Tree (Easy)

Sand (Easy)

Stone (Easy)

Breaking Stone (Easy)

TNT (Easy)

Tree Leaves (Easy)

Wood/Planks(Easy)

Cake (Easy)

Glow Stone (Easy)

Piston (Hard) [It Moves!]

Mushrooms/Flowers (Easy)

Door (EXPERT!)

Bed (Very Easy!)

Wools (All Easy)

 - Black

 - White

 - Blue

 - Cyan

 - Light Blue

 - Dark Grey

 - Light Grey

 - Light Green

 - Dark Green

 - Brown

 - Magenta 

 - Purple

 - Pink

 - Orange 

 - Yellow

 - Red

(P.S. Thanks to Minecraftpapercraft.com, as they host 99% of these images!)

Advertisement

Hello, i have a birthday party coming up in Dec. and i want to send out a creeper head cube invite that you can unfold. Can you see if you can send me a printout with the creeper colors aready on it and when folded up it needs to be the size of adult hand palm. My email is onefamilylove14e@gmail.com thank you so much!
<p>hello - I want to make 1x1 foot boxes for table tops for a bar mitzvah. can you help with the paper? I can get the boxes and do the cutting and gluing. my email is danacars@aol.com thank you, </p>
<p>When I try to upload my skins file it says that the file i have chosen was an invalid image? Am I doing something wrong?</p>
<p>If your skin is a newer one with an overlay (two layers) it won't work</p>
<p>The spider link doesn't work anymore, just thought you should know</p>
<p>What type of paper should I use for the origami?</p>
<p>What type of glue do you use for your paper crafting? I am doing a Minecraft birthday party for my son and trying to make it amazing!</p>
<p>I use PVA glue, which allows for easy application and some repositioning before it sets with a permanent hold.</p>
<p>how do you make the flame block?</p>
this was great fun making is
<p>minecraft!</p>
<p>this is amazing.I made it too</p>
I think all of those look cool.
<p>this is very cool and fun thank you</p>
<p>when i try all the blocks the wool is 403 forbidden plz fix:)</p>
<p>I love making these things all the time but usually never know where to go to find templates. Thanks so much for this, it was so helpful! </p>
<p>Wow! This is amazing. We've had a last minute change to a Minecraft party and my son is stoked. Thank you!</p>
<p>this is great i am loving it!!!!!!!!!!!!!!!!</p>
<p>This is awesome! I printed a bunch for my six year old for Christmas! You Rock! Thank you for sharing! Saved me $85.00 - of course used a bit of ink but well worth it and I could print what I wanted!</p>
Awesome!! Enjoy!<br>
<p>What I really love is how you put the difficulty level next to each item. I have seven kids and my teens cracked up about the ender dragon &quot;not for the faint of heart&quot;. After I saw all the pieces I decided I'm too old for those reindeer games and just printed off the picture and gonna hang it from the dining room chandelier above the other stuff! LOL - Merry Christmas!</p>
<p>Lol!! So glad they're a hit!</p><p>Happy Holidays!</p>
Thanks! I enjoyed this very much and I'm currently working on L for Lee!
<p>Can you explain me how to make the door? i dont understand it</p>
<p>Can you give pictures about how to make the piston?</p>
<p>These are wonderful but one question...Should these be printed out on regular paper or special paper (if so why type)? Thanks!</p>
Regular printer paper works just fine! But get creative!<br><br>Just watch out, any glossy stuff might smudge while folding,
<p>I need a thank you card.</p><p>anyone&hellip;???</p>
I've seen a paper furnace that is off on one side, and lit with fire on the other. Do you think you might add that?
I cant find sheep part two why??????????
<p>a little bit late but maybe we all need this link Sheep page 2 </p><p>http://pixelpapercraft.com/files/1334907037970.png</p>
<p>Hello. I need a reply as soon as possible. I don't know what kind of &quot;thick&quot; paper you're talking about? I want to know what kind of paper is thick enough and can fit in a printer? I would like to buy it, and I don't really have a lot of paper in the printer at the time, so I would like to get that paper and my printer paper.</p>
<p>I saw it on pinterest so I tried it!<br><br>I brought 1 inch blocks from a craft shop. Using normal printer paper I printer them out to that scale and mod podged it on to the blocks. They hold up really well and the mod podge gives it a protective coating as my son beats them about abit. Also you don't have to worry about cutting all the tags around the edge :)</p>
<p>Probably cardstock</p>
<p>It still works?</p>
<p>THANK YOU!!!! This was Very helpful and thank you once again for the guide to a Epic PaperCraft Creation! The Layout below is my head on the 10th Doctor's body from DoctorWho! #Allonsy #GeeksRule #Whovian4Life</p>
<p>My son and I test printed the Creeper and the pixels are a bit blurry. We printed this out full page (no border). Before we were doing border and it was too big and still pixeled and looked blurry. Is there a way to fix this? Maybe change to 300dpi (Ive been told an image this small wont make a print difference in 72dpi to 300dpi). Are we doing something wrong? Your images look clear and some others Ive seen look clear. Thank you!</p>
I think whatever software you're using to print the image is simply stretching it to full page! actual size is near a quarter of that.<br><br>I'd find a way to print the file unchanged- MS Paint will work for that! Otherwise, see if there's an option to print a 4&quot;x6&quot; maybe, that should look much more clear!
<p>I amaze myself sometimes :D</p>
^
This is awsome I made the first pig head
<p>Thank you for posting this! It's very helpful. A lot of these are really hard to find anywhere else on the internet so it's quite convenient. </p>
can u explain how to make the piston (working)
<p>The piston's easy!</p><p>Just build it in two parts. The main block, should have a hole from the top- once you finish the part with the shaft, you fold the tabs the hang off if it up, and slide it into that hole!</p><p>The little tabs that are on the end of the shaft help keep it from overextending, and falling out.</p><p>You can do it!</p>
<p>I have almost finished the EnderDragon.. Its wasn't too hard for me but maybe for others.. -_- I just got that annoying tail to do..<br><br>Uploading images take too long.. anyone know a faster way to show them? (Otherwise no images shown)</p>
Try printing on thicker craft papers for a sturdier papercraft. I found mine at Micheal's in the scrapbooking isle.

About This Instructable

3,038,654views

638favorites

License:

Bio: Although opposite of common belief, i really hate wearing hats! In all honestly though, I've not documented many of my projects- and i plan ... More »
More by BenBurge:BIRRD. A Laser Tag Cheating Device. The Ultimate Guide to Creating Chiptunes on the GameBoy! The Ultimate Guide to Minecraft Papercrafts! 
Add instructable to: