Print PDF
Favorite
Email
Step 3Finalize the letters
1. Print the graphic of each letter on a full sheet of 8 ½" x 11" sticker paper in the best quality your printer will allow.
2. Cut out each letter carefully.
3. Using the hole punch, punch out a hole in the center of each of the small dots.
4. Lay out each letter on the foam core the way you want the sign to look.
5. Use a ruler and pencil to mark a straight line for each word.
6. Carefully peel back the adhesive for each letter and apply the letters to the foam core.
7. Using a soldering iron, carefully burn through the foam care at each dot. This will be the hole for the LED's.
2. Cut out each letter carefully.
3. Using the hole punch, punch out a hole in the center of each of the small dots.
4. Lay out each letter on the foam core the way you want the sign to look.
5. Use a ruler and pencil to mark a straight line for each word.
6. Carefully peel back the adhesive for each letter and apply the letters to the foam core.
7. Using a soldering iron, carefully burn through the foam care at each dot. This will be the hole for the LED's.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
