Just make three cuts, drill two holes and assemble. Soon you will be soaking your friends and drenching your enemies.
Free Plans also available at http://www.waterzooka.com
Remove these ads by
Signing UpStep 1
The diagram lists the main parts of the WATERZOOKA.
You will need to cut three (3) pieces of PVC pipe and drill two (2) holes in PVC end caps.
Body
#1 - Piston Guide (PVC Cap, 2")
#2 - Cylinder (PVC Pipe, 2" x 24", Schedule 40)
#3 - Nozzle (PVC Cap, 2")
Piston
#4 - Piston End Cap (PVC Cap, 1 1/4")
#5 - Piston Rod (PVC Pipe, 1 1/4" x 22")
#6 - Coupler (PVC Coupler, 1 1/4")
#7 - Seal (O Ring, Buna-N, 1.6" ID x .21" CS)
#8 - Seal Holder (PVC Pipe, 1 1/4" x 2")
| « Previous Step | Download PDFView All Steps | Next Step » |




































A bunch of us had these for the calm sections...
I think it's only in australia though