Print PDF
Favorite
Email
Step 7
Final Assembly
1. Insert Piston Assembly into Body Assembly. Twist, push and pull Piston Assembly to evenly distribute waterproof grease throughout the inside of the Body.
2. Slide Piston Guide over Piston Assembly and push the Piston Guide to Body. DO NOT GLUE!!
If you ever need to clean your WATERZOOKA, just quickly pull back all the way on the piston to disassemble. Use liquid soap to clean all the parts and then reapply a glob a grease and reassemble.
3. Using PVC Glue - join the 1 1/4 cap onto the Piston Assembly.
Congratulations! Your WATERZOOKA is completed.
Safe Use - Never aim at eyes or face - Keep it Safe and Have Fun!
How - Always use a clean water source. Place the Nozzle in clean water, pull back the plunger to fill, push in the plunger to soak your target.
Where - Pools and Lakes are ideal. Rivers are okay as long as the water is deep - stay away from shallow water. Beaches are bad news - sand will cause damage.
Cleaning - Pull back quickly against Piston Guide to disassemble. Clean Piston and Body with liquid dish soap, re-apply a glob of Silicone Grease (or Vaseline) and re-assemble.
Piston Stuck? - Your piston may get stuck after sitting for a long time. Just twist and push/pull the plunger. If it's dirty, just follow the cleaning instructions.
1. Insert Piston Assembly into Body Assembly. Twist, push and pull Piston Assembly to evenly distribute waterproof grease throughout the inside of the Body.
2. Slide Piston Guide over Piston Assembly and push the Piston Guide to Body. DO NOT GLUE!!
If you ever need to clean your WATERZOOKA, just quickly pull back all the way on the piston to disassemble. Use liquid soap to clean all the parts and then reapply a glob a grease and reassemble.
3. Using PVC Glue - join the 1 1/4 cap onto the Piston Assembly.
Congratulations! Your WATERZOOKA is completed.
Safe Use - Never aim at eyes or face - Keep it Safe and Have Fun!
How - Always use a clean water source. Place the Nozzle in clean water, pull back the plunger to fill, push in the plunger to soak your target.
Where - Pools and Lakes are ideal. Rivers are okay as long as the water is deep - stay away from shallow water. Beaches are bad news - sand will cause damage.
Cleaning - Pull back quickly against Piston Guide to disassemble. Clean Piston and Body with liquid dish soap, re-apply a glob of Silicone Grease (or Vaseline) and re-assemble.
Piston Stuck? - Your piston may get stuck after sitting for a long time. Just twist and push/pull the plunger. If it's dirty, just follow the cleaning instructions.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
