The Guide to Homemade Silencers

Ok this is my very first instructable, yes i finally did one lol. I did this because many people have asked me for a guide i have on how to make homemade silencers, and i finally just said pfff ill make an instructable! This is not my original guide.

Step 1 What you will need !

Drill Rod 7/32" (for .22 weapons)

At least 12" of 1/4" brake line or other strong metal tubing

At least 12" of 1 1/2" PVC tubing and two end caps

Fiberglass resin and hardener

Several feet of fiberglass mat

One roll of masking tape

1/8" and 3/16" drill bits

Rubber bands

Razor blades

White lithium grease

Eye dropper

6 wood screws

Steel wool

80x sand paper

And possibly a pop! :D

Comments

[fez69]

Too bad this isn't original work:
http://www.scribd.com/doc/945967/Ebook-Guns-Silencers-Improvised-Silencer

[!Andrew_Modder!]

ya i no =\ . i said that a few times in my instructable. but i didnt have another source from where you can get it (got it on limewire)

[AnarchistAsian]

illegal downloads, how anarchist

[sharlston]

lol read your username for anarchanist

[whatsisface]

Err.. no.

[AnarchistAsian]

whatever...

[pdub77]

By the way, the atf can nail you for a suppressor even if it's made for an airsoft or paintball gun. It doesn't even have to be fully constructed, pieces are enough for big brother. Just be careful, folks. It would suck to get popped for making what you thought was a toy.

[timbudtwo]

this is from the book Hit Man: A Technical Manual for Independent Contractors

[thebluemartyr]

its OK, iv definitely seen these instructions before... but its good to have pictures. i would have changed the part about fiberglass resin, because honestly, where the heck do you get fiberglass and the resin to bond it? just mill a piece of metal to fit the end of the barrel and the brake line.

[Aeshir]

Wait...is this for a REAL gun? lol

[the true king o fools]

It's really sad that almost all the related Instructables below are about K'nex guns...

[HammyHavoc]

You pwn!

[GorillazMiko]

Haha, nice job Andrew! You could have a bit more pictures, real ones too, but pretty funny Instructable. ;-)

Example: DO NOT KILL PEOPLE lol

Haha, nice job! +1 rating, I just have to. :D

[!Andrew_Modder!]

lol thx