Print PDF
Favorite
Email
Step 6Remove the USB end of the lamp and strip the wires.
Removing the USB connector was a simple matter of pulling it down from the lamp neck, then snipping the wires.
There was a red wire, black wire and green ground wire inside. I stripped the end of the red wire and the end of the black wire.
You can use wire strippers for this. I used my teeth.
There was a red wire, black wire and green ground wire inside. I stripped the end of the red wire and the end of the black wire.
You can use wire strippers for this. I used my teeth.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
