Step 6: Assembly of the Tires
The tires are fairly easy. I used the 1/4" dowel to line up and attach the four parts to create the tire. Be sure to overlap/alternate each part so that the end result looks like tread (see photo).
1.) Place the dowel through the center of tire-4.
2.) Place the dowel through the center of tire-3 and place tire-3 over tire-4. Alternate the groves to begin creating the tread. Glue tire-3 to tire-4.
3.) Place the dowel through the center of tire-2 and over tire-3. Glue them together, again alternating the groves to continue with the tread process.
4.) Finally, place the dowel through the center of tire-1, place over tire-2, and glue them together.
Repeat steps to create four tires.
1.) Place the dowel through the center of tire-4.
2.) Place the dowel through the center of tire-3 and place tire-3 over tire-4. Alternate the groves to begin creating the tread. Glue tire-3 to tire-4.
3.) Place the dowel through the center of tire-2 and over tire-3. Glue them together, again alternating the groves to continue with the tread process.
4.) Finally, place the dowel through the center of tire-1, place over tire-2, and glue them together.
Repeat steps to create four tires.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
