Introduction: The X-Wing Fighter Jet

Picture of The X-Wing Fighter Jet

In this tutorial you will learn to make a X-Wing Fighter Jet out of office supplies to decorate your office or impress others.

Step 1: Materials

Picture of Materials

Materials

> 2 binder clip

> A SD card

> A sharpener

> A Highlighter

> 4 Paper clips

Tools

Tape

Hot glue (optional)

Step 2: The Tail

Picture of The Tail

>Start of by either hot gluing or taping on the SD card to the cap

>attach the binder to each side of the SD card

>tape or glue the sharpener

Step 3: The Missiles

Picture of The Missiles

On each binder clip attach a paper clip by either tape or glue

Then you can wait for it to dry if you used hot glue

Step 4: Your Done Enjoy Flying

Picture of Your Done Enjoy Flying

Enjoy flying your X-Wing Fighter Jet

Comments

About This Instructable

927views

1favorite

License:

More by mshafin:Knex Top Spins FASTScorpion CarK-nex Top
Add instructable to: