Introduction: The Alien From 5 Below

Picture of The Alien From 5 Below

In this instructable I will show you how to make a glowing alien robot. I've found a bunch of really cool instructables that I couldn't make because I didn't have the supplies so I hope you can make this one.


Step 1: Materials

Picture of Materials

Materials

1 pair of scissors

1 roll of duct tape

1 small plastic container

1 large red plastic cup

3 different colored markers

1 miniature flashlight

1 glue stick

Step 2: Step 1

Picture of Step 1


Cut out a piece of paper the size of your container.

Step 3: Step 2

Picture of Step 2

Cut out three holes on your piece of paper.

Step 4: Step 3

Picture of Step 3


Color the paper with your markers.

Step 5: Step 4

Picture of Step 4


Glue your colored paper on to your container.

Step 6: Step 5

Picture of Step 5

Cut off the bottom 2 and a half inches of the cup.

Step 7: Step 6

Picture of Step 6


Duct tape the cup bottom to your container.

Step 8: Step 7

Picture of Step 7

Build 4 legs made of duct tape. Build up from smaller layers of duct tape to larger layers of duct tape. Then cut the ends to make them pointy.

Step 9: Step 8

Picture of Step 8

Duct tape the legs to the body of your alien.

Step 10: Step 9

Picture of Step 9


Duct tape your miniature flashlight inside the plastic container

Step 11: Your Done!

Picture of Your Done!


Turn on the flashlight and flip it on it's legs. You have a glowing alien robot!

Comments

About This Instructable

737views

1favorite

License:

More by scarebob123:The alien from 5 below
Add instructable to: