Introduction: The Boss Trucks and the Flatbed Truck Suspension.

Picture of The Boss Trucks and the Flatbed Truck Suspension.

Here is what i am going to show you guys how to bulid my indepedent suspension. I know that you have heard about the, The boss truck long bed, The boss short bed, The boss tiger edition, The boss spider edition, and my prevous modle The elite flatbed truck.
And you will noticed the i don't use rubber bands.

Step 1: Step 1

Picture of Step 1

This section is were the casse connects to the blue rods

Step 2: Step 2

Picture of Step 2

The ornge connectors snap on the white rode inbetween the two green connectors which i am going to show you guys in the next step.
( NOTE ) there are blue spacers inbetween the tan end piec and the wheel.

Step 3: Step 3

Picture of Step 3

So now you have made all of the parts time to assembly  all them together.


~KGB~ (author)2011-03-06

look sturdy enough =D

rockclimber15 (author)~KGB~2011-03-06

it it and when you make trucks with it, it has a little bouns or spring wich is cool have you made one.

~KGB~ (author)rockclimber152011-03-06

kool, nahh, dont really like knexing anymore

rockclimber15 (author)~KGB~2011-03-06

whats knexing

~KGB~ (author)rockclimber152011-03-06

making knex things

About This Instructable




More by rockclimber15:The Annihiliator low rider truckThe junck yard Annihiliator low riderThe extrem Annihiliator off road edition
Add instructable to: