Step 3: Connect the boards

Picture of Connect the boards
If you are making a vibrator with a light, you will need to connect both of the boards power inputs together. you can do this by soldering one boards power wires to the power inputs on the other board, or simply by connecting one boards' power input wires to the battery connectors of the other board. then glue the 2 boards together so they stay together.
gavras5 years ago
can you solder the antenna on the mints body?
zack247 (author)  gavras5 years ago
you could, but you wouldn't get as good reception. right now i have the antenna sticking out of the tin, and taped on the top to keep it disguised