With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Ever had the problem of wanting to listen to music while in bed but don't like the inconvenience of headphones or getting tangled in cord if you fall ...
Needed Materials: -Headphones/small speakers -Material (i used felt) -Glue -Thread Needed Tools: -Marker -Scissors -Sewing Machine -Hot glue gun
I did a Head Test to get a rough indication of where the speakers would be. Then i drew my idea onto the bit of felt. The one pictured is by no means...
Cut out your design (this one will be the bottom) and then use it as a template for the other (this is the top). Simple!
Sew the bottom, both ends and half of the middle ones. This is because there has to be a gap left for the cords to pass through.
Glue both speaker to roughly the middle of each of their sections. Then bundle the excess cord (i had a bit) and glue it together and to the middle of...
Sew the other ends leaving a gap for the hole or the cord to pass. Then stuff each section with stuffing to your liking. I like it soft
Now sew the top together and don't forget to leave yet another gap for the cord to pass through. Then sew the top section together and you're nearly d...
Now tidy it up by cutting off the scrappy bits and loose bits of thread. I also decided to attach some safety pins to each end so i could pin it to my...
i pinned it to my pillow to stop it moving around. Now you can rock out while catching 40 (or more) winks!
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »