With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is an instructable on how to make a supah supah awesome glowy speaker ipod dock/charger. it is relatavly easy to make, and it doesnt require a lo...
What you will be needin:2 cans (empty campells tomato paste cans)1 iPod1 project box from Radio Shacksome wires1 4xAAA battery pack from Radio Shack1 ...
1.) Cut a hole in the lid of the project box that the dock thingy can fit into nice and tight. glue dat mug in place.2.) cut a hole in the dock thingy...
1.) cut the bottoms off the cans. you should be able to see through them.2.) bend the cut side inwards and glue the speakers down.3.) have a Jones Sod...
1.) find a sturdy object that fits the length of the speakers and the body of your iPwn. 2.) glue the speakers to the sides of the body3.) cover your ...
1.) plug your ipod into your iPwn and plug the iPwn into the wall. make sure all the stuff works, and test the blue glowy-ness. 2.) if everything work...
1.) cover neccisary places with tape.2.) shake up your paint can3.) paint the iPwn(the reason i used super flat black FIRST and then sprayed it with a...
congtrats, you are now the proud owner of an iPwn :)
1.) cover neccisary places with tape.
2.) shake up your paint can
3.) paint the iPwn
(the reason i used super flat black FIRST and then sprayed it with a super glossy clear coat instead of just using gloss paint is that a.) it lookes darker and more even and b.) it sticks to the metal and plastic better.)
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »