The kiteboogie: keep your tush 7 inches off the ground and go way too fast

Step 10 Putting on the front axle

Screw the 4 inch long 3/4" nipple onto the flange fitting on the front axle. Put the 3/4" washer on over the nipple. Now, lift up the body and put the pipe coming off the front axle through the flange fitting and pipe on the body. Now you can put it back down.

Screw on the tee fitting onto the 3/4" pipe. Put the 7 inch segments of 3/4" pipe on either end of the tee, and put tees at the ends of those pipe segments. Your steering column is now complete!