Introduction: The Letter S in PVC

Picture of The Letter S in PVC

Fun and easy activity

Step 1: Gather the Materials

Picture of Gather the Materials

You will need: 
PVC Cutter
2 pipes 4inches long at 1/2 inch thick
4 pipes 2inches long at 1/2 inch thick
3 90degree elbow connectors
2 45degree elbow connectors

Step 2: Cut the PVC

Picture of Cut the PVC

cut the 1/2 inch thick PVC so you have 2 pipes that are four inches long and 4 pipes that are 2 inches long.

Step 3: Connect the Pipes

Picture of Connect the Pipes

Use the picture as a guide each part is labeled


About This Instructable




More by rgreen2014:Alien Spaceship LampThe letter S in PVCLetter E in PVC
Add instructable to: