Step 2: Preparing the bulb
Please wear gloves and protecting glasses if you do this!
Use a Dremel to cut of the end cap.
Carefully remove the inner parts of the bulb.
If you are doing right you will have a bulb that looks like the bulb in the second picture.
Use a Dremel to cut of the end cap.
Carefully remove the inner parts of the bulb.
If you are doing right you will have a bulb that looks like the bulb in the second picture.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
