Instructables
loading
loading

The plastic bag hoodie: How to fuse plastic bags and sew them into a hoodie

FeaturedContest Winner
Picture of The plastic bag hoodie: How to fuse plastic bags and sew them into a hoodie
041.JPG
013.JPG
I was inspired to make this Instructable by two things. 1. my lack of a rain jacket and 2. a project by maker bre who use to do weekend project for MAKE: magazine

So one rainy Saturday night I was running thought downtown with my friends to get out of the rain. i was wearing my favorite zip-up hoodie and when we got into a near by Starbucks I thought ,in my sopping wet hoodie "this does not work, this does not work at all"
Now at this point one of friends suggested we should have brought ponchos but I hate ponchos. So when I got home I found this weekend project on fusing plastic bags. So thus was born

The plastic bag hoodie.

Now you don't have to make a hoodie, you could make any thing you want. A wallet, a camera case, a parachute or even a rocket ship!!!!! (OK so I don't really recommend the last two but if your heart says yes go for it! but I'm not responsible )

Why is this instructable "green"? well billions of groceries bags are used every day and they serve a good purpose, to get your groceries home. But the humble grocery bag is used for how long? on average five minutes at most. So let it be reborn into something new and better. Not many people ever get to recycling their plastic bags. Also it takes less energy to make than reprocessing the plastic bag recycling plant or buying a raincoat made in gigantic factory or sweat shops .So this instructable

1. Saves plastic bags from slowly decomposing in landfills.

2. Keeps you nice and dry

3. Saves you money

4. saves energy

5. And it's easy!

6. it's freeeeee!!!!!


by the way this is the first time I've used a sewing machine (but i was going for the Frankenstein look)

also makes a cool original gift!
 
Remove these adsRemove these ads by Signing Up
1-40 of 175Next »
This seems super cool but my mom is worried about me messing up her iron is there a chance that could happen? or could I get one for cheap at a thrift store or something like that?
imrobot (author)  DataLoreBorg13 days ago
Hey there! When I originally made this my mom had the same concern! In the end I went out and bought a cheap iron and nothing bad happened to it during the project, I was really careful to never let any plastic out from the wax paper near the iron. I was a good thing i bought the iron though, it meant i had one already when I went to college!

Thanks Alot man I made it today and I came up with some awesome uses for it. Do you know of any ways to paint it? because now it looks really ugly

imrobot (author)  DataLoreBorg12 days ago

not that i know of, that tyvec look is sort of part of it. In my experience shopping bags can look a little smoother. Maybe 8 layers instead of 4?

I used 12 layers of K-mart bags and it had a weird webish texture so I tried a spray paint that sticks to plastic so I'll see how that turned out in the morning!

Update: The spay paint worked and it stuck to the plastic even when you bent it.

imrobot (author)  DataLoreBorg11 days ago

A++, I pinned you up in the comments so hopefully your experimentation help others!

Cool Thanks!

St Jimmy4 years ago
If you are only making a small object (a card case for my Magic cards), could you skip the sewing and instead fuse at right angles along the seam?
imrobot (author)  St Jimmy4 years ago
maybe but I'm not sure if I follow what you are saying
I mean place two sheets against each other at right angles (one flat and one pointing down) and fuse with the iron. Also, I tried it, and it isn't strong, but it worked. Also also, I found that anything thicker than five layers (2 and a half bags) was too thick and got holes in it and didn't fuse properly
imrobot (author)  St Jimmy4 years ago
interesting, if you don't mind I'm going to feature your comment, it's got some great info!
Cool man, thanks!
geekdude6 years ago
yes but does fuseing the bags emit toxins into the air? did it make you feel lightheadded? on second thought it probably doesnt release much toxic gass unless you fuse the pieces together with a soldering iron also mabye you could use all white bags and add some type of dye. i have seen how tos on the internet about dyeing plastic computer parts with Rit.
I guess I shouldn't be talking I often solder in improperly ventilated areas
I guess I shouldn't be talking I often solder in improperly ventilated areas
I have over heated plastic bags when fusing them....very dizzy and nauseous for about 15 minutes. I did not like that.
Arghus geekdude6 years ago
i don't think because it doesnt burn the plastic but just melts it with the iron
imrobot (author)  geekdude6 years ago
oooo nice catch i forgot to mention to do this in a well ventilated area like a garage
Actually you did say that, in step 4.
imrobot (author)  CorpseRsCarla6 years ago
oh... that's embarrassing I guess I'm more of a space case than I thought... opps
Ok, I been doing this for years--even won an iPad for my plastic bag coat a few years back. Its a cool idea. but...I must tell you...

1. You should not even have plastic bags "from target." We all should be greener...eco concious in going to the store. bring your own bags when shopping (hopefully not plastic bags). Now...if you need plastic bags....ask your friends and neighbors, or raid the plastic bag collection bins at the major grocery and office supply stores.

2. Plastic bags, or anything else will not decompose in a landfill. Studies have shown that even newspaper, and food waste still intact after 40 YEARS...due to landfills having no oxygen in them. Its a fallacy that anything biodegrades in landfills. So don't say it, please?

3. I love the hoodie. It looks like you used spray paint ....? Cool look, but then you are not being eco friendly with all those cans, and air borne droplets. Just saying. Its a great project, and you have a AWESOME expensive looking fashion here...but environmental pluses are not all that in this case. its STILL is wonderful though.

whew...just HAD to get this off my chest.

imrobot (author)  urbanwoodswalker2 years ago
Wow, awesome! No used some trash bags.
greensteam6 years ago
How did it work out in actual rain? It occurred to me that the seams might leak where the sewing has created holes. Commercial waterproofs have taped seams to get over that problem. Perhaps you could do the same by ironing/fusing more plastic over each seam?? Or even just ironing the whole thing again might be enough?? I like the look though. good job.
If you iron over the work again, after its nearly finished, , you stand the risk of shrinking the jacket in parts. Or melting a hole. I have had all these problems in making plastic bag clothing.
imrobot (author)  greensteam6 years ago
hmmm I think about it, and about the waterproof-ness once I get the zipper I'll tell you (but I'm pretty sure it fine, I feel the water is more likely to roll past it before getting through such a small hole)
to waterproof seams i use a thin line of clear silicone calking that comes in a little squeeze tube, use inside the jacket, and run it along the stitch line, spread and flatten with your finger or carboard . let dry. this does work, and uses up half finished tubes lying around.
soldering the plastic sheets together instead of sewing them (as imrobot briefly mentioned) would get rid of the problem of leakage.
imrobot (author)  socalgrl6 years ago
will it stay flexible and is it expensive? thanks and don't forget to vote!
Caulk is very flexible (its like rubber) and you can buy a tube for a few dollars at a home improvement store.
imrobot (author)  bmlbytes6 years ago
hmmm i think i mean is it limp because you will want as much free movement as you can get.
It wont restrict your movement if you only put it on the seems
imrobot (author)  bmlbytes6 years ago
ahh but look the seems are everywhere! but what I'm most worried about is the seems on the arms.
I see you've never been camping in a seemingly waterproof tent before.
imrobot (author)  itsalladream6 years ago
elaborate
Well, if you look at a tent, it would seemingly be waterproof (even though some aren't, and some are supposed to be, but aren't), but give it a few minutes, and water will begin seeping in through the stitches. Also, with this, considering that it is plastic, the pastic may be prone to stretching around the threaded holes with minimal pulling against the threads. And maybe I'm wrong, but it just seems that way to me. Wrong or right, this idea could be made to work.
imrobot (author)  itsalladream6 years ago
hmmm in that case it may be wise to fuse one layer of plastic over the stitches. good point thanks imrobot
Actually you need some air holes to let it breath, If it doesn't, it'll be raining on the inside with your sweat! Been there- I know!
FYI there is no inherent danger in fusing plastic bags with a low temp iron. there is no inherent danger in shrinking polystyrene (#6 plastics) at the temperatures available in a home oven. they do not off-gas dioxins and are not causing ecological damage. polystyrene and polyethelene (used in plastic bags) does not contain the chemical constituents necessary to produce dioxin.
Its ALL too easy to over heat plastic in this kind of project. I have made many art garments out of plastic bags...for galleries, and fashion shows. I can say you CAN indeed over heat plastic bags...if your iron is too hot. and the undetectable fumes can make you very dizzy , nauseous, and kill a small pet such as a bird. Always do this with every door and window open, or outdoors!

I have worked with plastics for 8 years now...burned it, melted it, fried it, you name it...and done a lot of reading on the subject. plus I HAVE gotten sick at least 3 times in 8 years from over heating plastic bags. Plastic bags comes in at least 3 different codes. Its impossible to be able to tell the exact chemical compositions all of the time. and depending on how thin or thick it is, and if its made with recycled content...they all have varying rates of heat melt.

I am not saying not to try this wonderful craft...but saying there is "no inherent danger" is false. I have taught fusing plastic bags also...and always say there is a certain risk. If you are getting holes when you fuse...your iron is too high a temp for that particular bag.

And as for your statements about lack of toxicity , no "off gassing" etc. ....I would like to know where you are getting your information. Its simply not true. The point is...taking risks is creative and fun...but please arm yourself with knowledge and do not mid-inform anyone.

1-40 of 175Next »