Introduction: The Skateboard Light.

Picture of The Skateboard Light.

Will not last long to build this.at 30 min.Almost no cost. Good work!!

Step 1: Required the Following Things

Picture of Required the Following Things

-insulating tape

-3 led

-screwdriver

-1 wood panel

-9V rechargable/normal battery

-9V jack

-8pcs. screw

-4 fixer

-a pencil

Step 2: Draw Locations

Picture of Draw Locations

Draw the hols location and LED'S.

Step 3: Palace on the Board the Wood Panel

Picture of Palace on the Board the Wood Panel

It will not appear on the other side of the board screw.

Step 4: Palace

Picture of Palace

Put the reservoir leds and the battery case

Step 5: Behold, the End Result. Watch the Finish Video

Picture of Behold, the End Result.     Watch the Finish Video

Connect the leds in the battery.The cables attach it to the axis of the board.

Comments

dkrisztián (author)2014-11-23

coming soon

About This Instructable

405views

7favorites

More by dkrisztián:The skateboard light.
Add instructable to: