V. 1.2= there are mods to make it hold more rubber bands, I don't have pictures, but I did try to make it as clear as possible to what you do.
V. 1.3= there is a mod for full auto, it is not that useful though, considering they all shoot at once. someone will find it useful though.
Step 1: Parts List
to build version 1.2 you need another white connector and 8 white rods
to build version 1.3 you need two less green rods
Step 2: The Triger Area
This is were the mods take place so pay attention to the boxes
1-2 two veiws of the same peice
7-8 two veiws of the same part
15 is puting the blue rod through the triger and body
16 do this to both
17 put this through the green conectors
20 should look like this
21 add this
22 to the other side
Step 3: The Handle
2 there are 4 blue spacers
Step 4: The Guard and Mag (for Looks)
1-2 same part diferent veiws
3-5 same part diferent veiws
9 put it together
Step 5: The Barrel
all pictures are the same part
Step 6: Front Handle
all same part
Step 7: Ruber Band Placement and Shooting
1-3 how to place it
4 pull the gear back
5 put a nother one on
V. 1.1 was a folding stock that well, was quite bad.
if you make V. 1.2, you increase your ammo hold by 5 bands.
Once again i do not recommend V. 1.3 because of the fact that it makes the gun single shot.
Next up the Dur-24 wrist rbg shotgun.