Instructables

The ultimate, heavy duty, stackable, bullet proof, extreme saw horses!

Featured

Step 11: Assembling leg #3 to the top

This was the tricky one!

Flip the assembly over and replace the wedge under the left edge of the top.

Using a brace (one from step 8), support the leg on the left side of the top. Once again, please see the picture for clarity.

Using the provious procedures, install leg #3. Don't forget to use the quarter inch shims under the leg.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!