Print PDF
Favorite
Email
Step 8Roughing out the braces
Cut the braces from 3/4" plywood. I made them 5" wide by 20" long.
The width can be wider. If so, the horses when stacked will rest on the braces rather than on the legs. No problem either way.
The length will be trimed to fit later.
Cut two braces for each horse.
The width can be wider. If so, the horses when stacked will rest on the braces rather than on the legs. No problem either way.
The length will be trimed to fit later.
Cut two braces for each horse.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
