Print PDF
Favorite
Email
Step 5Velcro
Detach the loops from the hooks, and set the side with the hard plastic hooks aside. We're looking for the cloth side to pad the marker interior, and keep the laser from rattling around.
Do NOT remove the sticky backing (if the velcro has it) yet.
Basically, cut the velcro a bit large and slowly trim the piece down to size so it fits perfectly in the marker piece and the ends just touch while inside. Make sure the pieces AREN'T too wide and stick out the caps, if they do, just trim them down a bit more.
Now you may glue or stick the velcro inside the caps it should be a nice smooth, snug, fit, and move on to the next step!
Do NOT remove the sticky backing (if the velcro has it) yet.
Basically, cut the velcro a bit large and slowly trim the piece down to size so it fits perfectly in the marker piece and the ends just touch while inside. Make sure the pieces AREN'T too wide and stick out the caps, if they do, just trim them down a bit more.
Now you may glue or stick the velcro inside the caps it should be a nice smooth, snug, fit, and move on to the next step!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
