Step 4: Loading and Firing
Our favorite step. I'm sure you'll love carrying this thing around in your pocket to show off.
1. The firing pin. Yes the tape is needed.
2. Stick it in and add a rubber band or two. You could probably stick it up farther a white rod I just like cocking the thing easily.
3. Ammo and mag pusher ( I prefer saying auto loader as it automatically loads the ammo into the gun)
4. Add them and you're ready to go.
Then you just need to pull pack the pin past the magazine and gently let the pin push the ammo forward until locked into place behind the trigger. Pull the trigger and watch that plastic fly! To recock push on ram from the front of the gun until you can pull the ram from the back.
Have fun! Satisfaction guaranteed or your time back!
1. The firing pin. Yes the tape is needed.
2. Stick it in and add a rubber band or two. You could probably stick it up farther a white rod I just like cocking the thing easily.
3. Ammo and mag pusher ( I prefer saying auto loader as it automatically loads the ammo into the gun)
4. Add them and you're ready to go.
Then you just need to pull pack the pin past the magazine and gently let the pin push the ammo forward until locked into place behind the trigger. Pull the trigger and watch that plastic fly! To recock push on ram from the front of the gun until you can pull the ram from the back.
Have fun! Satisfaction guaranteed or your time back!
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
lugnut1996
says:
Jul 24, 2009. 6:41 PMReply
a rubber band does work better instead of tape
fauge7
in reply to Nov 21, 2009. 7:28 AMReply
ill try it thanks
fauge7
in reply to Nov 21, 2009. 7:31 AMReply
it works thanks
stuartg7775
says:
Sep 6, 2009. 9:09 AMReply
hey thanks i like it. lol i out a really strong rubber band for the magizine and instead of it pushing one muni in place it put 2. thanks anyway cheers
Visit Our Store »
Go Pro Today »
