Introduction: Thermocol Boat

Hi i am Shivaraj from kaggalipura makerspace. today we are going to show you how to make a boat using Thermocol.

Makers

Prashanth

Chethan

Shivaraj

Materials

1.motor

2.battery

3.Thermocol

4.glue

5.toy fan

6.wires

7.switch

Tools

1.Scissor

2.Sand paper

3.glue gun

4.blade

Step 1: Make a Sketch and Cut

Take a Thermocol and make a drawing of boat design then cut it with the help of blade as shown i the image.

Step 2: Give Finishing

Take the catted Thermocol and give good finishing with the help of sand paper slowly.

Step 3: Fix Motor

After sanding you must have to take two motors and fix them to the boat body.

Step 4: Fix the Fan and Batteries

Take a two toy fan and batteries and fix them to your boat.

Comments

author
Sridharas5999 (author)2016-09-11

Thank for sharing

author
DreamDabbler (author)2016-07-08

A good beginning project for kids. You might experiment with making your own little paddle wheels instead of the fan or propeller blades. Also try fixing a triangle of thermocol underneath, or two on the sides, for stability, and mount a vertical piece off the back with wires for an adjustable rudder.

author

Really thank you for your grate suggetion :)

author

It sounds like something I could have a lot of fun with, and I hope you do, too!

author
Ammu 2000 (author)DreamDabbler2016-08-21

THANK YOU

author
DIY Hacks and How Tos (author)2016-07-07

Cool project. Thanks for sharing.

author

Thank you :)

author

(Tanks you)

About This Instructable

2,432views

6favorites

License:

More by shivaraj2999:Balloon BoatThermocol boat
Add instructable to: