loading

Hey,

In this procejt i have tried to explain how to make thermometer with DHT11 and 16x2 LCD screen.However, i have tried to explain how to creat custom charecters and basic animations...

Required materials:

x1 Arduino UNO

x1 Breadboard

x1 DHT11 Temperature and Humidity sensor

x1 16x2LCD Screen

Enough JUMPER

Importent thing is :
As we creating new custom characters, we using binary coding system. like : byte Custom1[8] = { 0b01110,

0b11011, 0b10001,0b10001,0b10001,0b10001,0b10001, 0b11111 };
0b represents binary; other zeros and ones represent whether pixels on or off.So, we can Create whatever we want!

Codes,library and fritzing are uploaded here ,However you can reach from on github(but on the github codes have some Turkish letter cos of my main language i have translated into English here):https://goo.gl/NWbYAE

If any question or suggestion here or on YouTube channel please...

Good Luck,Have Fun!

Burada Türkiye'den bir proje görmek ne güzel..
<p>Teşekk&uuml;rler :)</p>
<p>Cool project. You should enter this in Microcontroller contest.</p>
<p>Thanks. All the important codes and circuit diagram uploaded.</p>

About This Instructable

140views

5favorites

License:

Bio: Arduino projects in my youtube channel: https://goo.gl/kDaptw Contact me:arduino.hocam@gmail.com
More by arduinohocam:Temperature Controlled FAN With an Arduino Arduino Voltmeter :) Arduino Keypad Door Lock System 
Add instructable to: