Step 5: Position the wallet
Place the wallet section in the tie material so that the wrong sides of the materials are covered by one another.
Fold the outer edges of the tie over the inner wallet section. It might be a good idea to do a double fold so that the cut edge of the tie is hidden from view.
Do not sew the narrow neck section together at this time.
Turn the tie over and fold neck section in half along the long axis. Sew the neck section together so that there is a 1/2 inch wide sewn line. The neck will now be inside out.
Use a yard stick or other narrow straight edge to push the neck through itself so that the tie is right side out.
Iron the entire tie flat.
Fold the outer edges of the tie over the inner wallet section. It might be a good idea to do a double fold so that the cut edge of the tie is hidden from view.
Do not sew the narrow neck section together at this time.
Turn the tie over and fold neck section in half along the long axis. Sew the neck section together so that there is a 1/2 inch wide sewn line. The neck will now be inside out.
Use a yard stick or other narrow straight edge to push the neck through itself so that the tie is right side out.
Iron the entire tie flat.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
