With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is my first instructable so its not the greatest thing.Leave a comment so I can improve. The Robot in this instructable was a participant in the...
Our assigned task was to pick up wooden cubes with dimensions 3.5 by 3.5 by 3.5 inches and to drop them in a bin with diameter of 36 inches and height...
One of : 2.4 GHZ Spektrum AR6000 DSM DuaLink 6-Channel Park Flyer Receiver http://www.spektrumrc.com/Products/Default.aspx?ProdId=SPM6000 One of : S...
Cut out two pieces of wood with the following measurements for the sides.
The measurements for the top piece of wood.
Gears were welded on to the Wheels.
For the Body of the robot we decided to use the concept of a 3 dimensional jigsaw puzzle where we created slots and perfectly fitting parts cut out o...
For a demonstration of the lift system while in the building process : http://www.youtube.com/watch?v=yLoz1h84vnI&feature=youtu.be Drawer slid...
The threaded rod was drilled and the Motor shaft was inserted in the hole which was secured by cold weld. The threaded rod passes through a nut which...
All the Positive Wires were connected to the Battery in Parallel. All the Negative Wires were connected to the Battery in Parallel. Here is a link t...
Wiring for the Sabertooth : - Wire with the Blue tip connects to the Positive Terminal of the 12V Battery. - The Wire on the Right side of the Blue ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »