Introduction: Timber Hitch

Picture of Timber Hitch

Created by Evakyl

Step 1: First, Loop Your Cordage Under the Object You Are Tying the Knot To.

Picture of First, Loop Your Cordage Under the Object You Are Tying the Knot To.

Step 2: As You Finish the Loop, Slip the Cordage Under the Rest of the Cordage Creating an X.

Picture of As You Finish the Loop, Slip the Cordage Under the Rest of the Cordage Creating an X.

Step 3: Take the End and Wrap It Around the Base of the First Loop. It Should Look Like the Picture.

Picture of Take the End and Wrap It Around the Base of the First Loop. It Should Look Like the Picture.

Step 4: Take the End and Slip It Through the First Loop.

Picture of Take the End and Slip It Through the First Loop.

Step 5: Tighten the Knot a Bit and It Should Look Like This.

Picture of Tighten the Knot a Bit and It Should Look Like This.

Step 6: Take the Rest of the End and Continue to Loop Under and Around the Cordage on the Pencil Moving Away From the Knot.

Picture of Take the Rest of the End and Continue to Loop Under and Around the Cordage on the Pencil Moving Away From the Knot.

Comments

About This Instructable

370views

6favorites

License:

More by Aunelulth:Horizontal LashingDiagonal LashingTimber Hitch
Add instructable to: