Print PDF
Favorite
Email
Step 8Plug and play
Now is the time to plug it all in.
Plug the relay coil pins to Pin 7 of the Arduino and ground on the Arduino. The relay coil pins are the two pins that aren't towards the ends of the tube.
The two pins towards the end of the long tube go into the socket pins in the camera. It does not matter which wire goes in which socket pin.
Plug the relay coil pins to Pin 7 of the Arduino and ground on the Arduino. The relay coil pins are the two pins that aren't towards the ends of the tube.
The two pins towards the end of the long tube go into the socket pins in the camera. It does not matter which wire goes in which socket pin.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
