Instructables
I was looking for a fast  simple Airsoft Target and thought of this.
This could be a limitless supply :-)
(If you use a lot of tins).
 
Remove these adsRemove these ads by Signing Up

Step 1: Ring A Ding Pull

Picture of Ring A Ding Pull
IMG_20131113_130820.jpg
Using the ring pull from food tins I made stand up targets.

Step 2: Snip N Bend

Picture of Snip N Bend
IMG_20131113_132028.jpg
Standard can tops can be snipped at an angle and bent to stand.
They fairly fly when hit . ( See Dented Standard Lids).

Step 3: Colour it up

Picture of Colour it up
Use marker pens to draw what you like on the targets.
BE VERY CAREFUL WITH THE SHARP EDGES.