Print PDF
Favorite
Email
Step 3Tips
When drilling holes into the tin, get a hammer and screw or nail and tap the spot you will drill to get a cleaner hole.
Use electric tape to put in the Piezo instead of hot glue incase you need to replace/reuse it
Try using pedals, I got to use some of my friends pedals and was able to make lots of interesting and cool sounds.
Make sure to put the bic pen piece on the bottom of the tin, I tried using electrical tape and it kinda worked but I should have added more.
Mark the areas you will drill.
Use electric tape to put in the Piezo instead of hot glue incase you need to replace/reuse it
Try using pedals, I got to use some of my friends pedals and was able to make lots of interesting and cool sounds.
Make sure to put the bic pen piece on the bottom of the tin, I tried using electrical tape and it kinda worked but I should have added more.
Mark the areas you will drill.
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
May 9, 2009. 3:53 AMsupamunki
says:
how should i string my guitar to the body i have everything else sorted but the stringing to the body? PLEASE REPLY
Reply
May 3, 2010. 6:14 PMzhaopow
says:
the strings go through the hols and glued onto the bottom next to the peizo also i used real tuning pegs not eyeboltsb
Reply
 |
Add Comment
|
