this is how i'm making tons of paper flowers.
Step 1: Cut Tissue Paper Into Rectangles
there should be 4 of them and they should be approximately the size of index cards.
Step 2: Stack Rectangles
Step 3: Start Folding
from the top down, fold should be about 1cm wide
Step 4: Flip It Over and Fold Back (zig Zag)
Step 5: Fold Up the Rest of the Paper
Step 6: Trim Ends So They're Curved (like Petals
Step 7: Cut Notches on the Top and Bottom in the Middle
but don't cut the whole way through
Step 8: Thread Your Wire, Loop, and Twist
such that the stem is secured to the tissue paper
Step 9: Gently Unfold
start with one side and gently separate and spread out the petals