Print PDF
Favorite
Email
Step 5Castors
The original castors were attached to the frame but I soon found that the rock wheels had a tendency to scrape when the car went across uneven ground.
To fix this I cut openings in the bottom of the rock wheels and installed a 2x4 flush with the bottom. This provides a strong mount for the castors. I then attached the castors using 2" lag bolts.
To fix this I cut openings in the bottom of the rock wheels and installed a 2x4 flush with the bottom. This provides a strong mount for the castors. I then attached the castors using 2" lag bolts.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Dec 1, 2011. 11:22 AMvmuro
says:
Is there any way you can make one and ill buy it from you (:
Reply
 |
Add Comment
|
