Toilet Tank Bean Sprouter

Step 2 Bottle Support Mechanism

Construct some mechanism which will support the "sprouter" a couple of inches above the max water level of your toilet tank. It is important to keep an open air space between the tank water and the bottom of the sprouter or the "drain".

I used the "Adjustable Height Wire Hanger Bottle Hanger" mounted on a 3/4 inch piece of plywood which is mounted on the wall just above my toilet tank. The plywood allows me to NOT destroy the wall as well as act as a spacer to better position the sprouter drain.

See Wire Hanger Bottle Hanger to construct unit shown.