Time to organize those tool drawers! If you're like me, you might have have an older drill bit or 50 left over from various projects laying around loose in your tool drawers that aren't quite in bad enough shape to throw away yet. You might also have a couple of dozen screw driver bits scattered all over the place. And if your wife is like mine, she might not appreciate you using the good Tupperware to organize your tools.

So, I took an empty cereal box, laid down a layer of duct tape (bottoms and sides), used a razor knife to cut the box along the edge of the duct tape and voila! Instant (and cheap) tool drawer organizers! These are the first of these that I've made. In the future, I may make some that are a bit sturdier by using corrugated cardboard. I'm thinking the flat rate shipping boxes you can pick up for free from your local post office will work nicely (free is good). But for now, these are perfect. My "drill drawer" doesn't rattle anymore!