Print PDF
Favorite
Email
Step 4Drill!
Drill holes with the 5/8 drill bit. Remember to stay on the top (the chalkline) and drill straight up and down!! Do not apply too much pressure, or the PVC may crack and take out a large chunk! Let the drill do the work and do NOT force it.
Do NOT use a speed bore bit, it will chew up the PVC and send large chunks of PVC flying all over your workspace. The duller the bit, the better.
Do NOT use a speed bore bit, it will chew up the PVC and send large chunks of PVC flying all over your workspace. The duller the bit, the better.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Oct 19, 2010. 6:48 AMLobbyDizzle
says:
Oh man, you should be wearing a cup!
Reply
 |
Add Comment
|
