Introduction: Tornado Bottle

Picture of Tornado Bottle

This is a simple instructable on how to create a continuous water tornado in a bottle!

Step 1: Get Two Basic 2 Liter Bottles

Picture of Get Two Basic 2 Liter Bottles

Step 2: Print Out the Tornado Tube With a 3d Printer From Thingiverse

Picture of Print Out the Tornado Tube With a 3d Printer From Thingiverse

Step 3: Attach the Two Bottles. One on Top of the Other.

Picture of Attach the Two Bottles. One on Top of the Other.

Step 4: Get a 12V Bater and 2 Alligator Clips.

Picture of Get a 12V Bater and 2 Alligator Clips.

Step 5: Get Compatible Tubing for Your Pump and Attach It to the Pump.

Picture of Get Compatible Tubing for Your Pump and Attach It to the Pump.

Step 6: Lastly, Drill Holes Into the Bottles. Insert the Tubing Into the Bottles So That It Sucks From the Bottom Bottle and Sprays the Water Into the Upper Bottle. (zip Ties May Help Hold the Tubing in Place)

Picture of Lastly, Drill Holes Into the Bottles. Insert the Tubing Into the Bottles So That It Sucks From the Bottom Bottle and Sprays the Water Into the Upper Bottle. (zip Ties May Help Hold the Tubing in Place)

Step 7:

Step 8:

Step 9:

Comments

TomV4 (author)2015-10-17

Mesmerizing.

amberrayh (author)2015-10-16

Wow. This is cool! Thanks for sharing.

About This Instructable

913views

16favorites

License:

More by johns307:Tornado Bottle
Add instructable to: