With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Update: New interface - look at the last step. Credits: Arduino sensing done by DZL, Processing sketch and Instructable done by Mads Hobye. Disney Research lab designed a novel way to ...
To make the shield for Arduino you will need the following components: Arduino Usb cable Shield pin headers Resister: 10k, 1MOmh, 3,3k Capacitor: 100pf, 10nf Diode: 1N4148 diode ...
The shield should be build according to the diagram included here. I have included a picture of the finished shield so you can look at the actual prototype.
There are lots of tutorials who have already explained how to program an Arduino and they do a much better job than we could. So we will just ...
You will need processing to visualize the graph. Here are the general steps to get it up and running: Download and install Processing (http://www.processing.org) Get the sketch from github ...
Some of you have problem with the processing sketch. This is due to a crappy graphing interface written in processing. I have made an alternative version. It is based ...
Arduino Alarm Clock Canvas-- How Toby lauren_gould
Arduino - TTP223B - CAPACITIVE TOUCH SENSOR SWITCH by vandenbrande
How to make a polyphonic music installation triggered by capacitive touch points usin...by Dieter Pilger
Draw It Yourself - MIDI controller with conductive inkby dsanz006
Touch Board + Grapherby Bare Conductive
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.